• E-Link Converter eli

    Under names such as SmartMeter, Linky, and other well-known devices, there is an increasing number of systems in use across Europe to transmit data about electricity, gas, and water consumption. The data is transmitted digitally via high frequency signals. This creates a large potential for negative stray fields, which can massively influence the living cells in your body. With the i-like E-Link Converter, you can vitalise the electrosmog emitted by radio-controlled systems like the utility meters mentioned above.

    Service life: a minimum of 30 years

    Product details

    New technology for municipal meters: new electrosmog counter with control functions!

    Under names such as SmartMeter, Linky, and other well-known devices, there is an increasing number of systems in use across Europe to transmit data about electricity, gas, and water consumption. These devices continuously measure consumption and transmit the data to the local utility companies at certain intervals (usually every 15 minutes).

    The majority of European households will be converted to this new technology in the years to come. This will create a smart grid. That will offer customers the opportunity to monitor and react to their own power consumption via a smartphone app. In addition, such devices will have interfaces to other smart components that can be connected. These include, for example, intelligent device control systems and the like.

    The result will be a comprehensive controlling system.

    The data is transmitted digitally via high frequency signals. This means that with the new technology will require a permanent mobile radio connection and thus a radio storm in the high frequency range for information transmission is established. This creates a large potential for negative stray fields, which can massively influence the living cells in your body.

    The control frequency spectrum on these devices is enormous. With the i-like E-Link Converter, you can vitalise the electrosmog emitted by radio-controlled systems like the utility meters mentioned above. Regulation is only possible using a new, specially developed converter: the E-Link Converter. The converter is placed directly on the electronic meter. Neither the Room-Converter nor the other i-like Converters have these counter-frequencies. Unfortunately, the installation of a new E-Link Converter on the Room-Converter is not sufficient. The new Converter really needs to be attached directly to or placed on the radio transmission system.

    incl. VAT
    Out of Stock
    10145 E-Link Converter 1x
    CHF99.00
    Out of Stock

Under names such as SmartMeter, Linky, and other well-known devices, there is an increasing number of systems in use across Europe to transmit data about electricity, gas, and water consumption. The data is transmitted digitally via high frequency signals. This creates a large potential for negative stray fields, which can massively influence the living cells in your body. With the i-like E-Link Converter, you can vitalise the electrosmog emitted by radio-controlled systems like the utility meters mentioned above.

Service life: a minimum of 30 years

Product details

New technology for municipal meters: new electrosmog counter with control functions!

Under names such as SmartMeter, Linky, and other well-known devices, there is an increasing number of systems in use across Europe to transmit data about electricity, gas, and water consumption. These devices continuously measure consumption and transmit the data to the local utility companies at certain intervals (usually every 15 minutes).

The majority of European households will be converted to this new technology in the years to come. This will create a smart grid. That will offer customers the opportunity to monitor and react to their own power consumption via a smartphone app. In addition, such devices will have interfaces to other smart components that can be connected. These include, for example, intelligent device control systems and the like.

The result will be a comprehensive controlling system.

The data is transmitted digitally via high frequency signals. This means that with the new technology will require a permanent mobile radio connection and thus a radio storm in the high frequency range for information transmission is established. This creates a large potential for negative stray fields, which can massively influence the living cells in your body.

The control frequency spectrum on these devices is enormous. With the i-like E-Link Converter, you can vitalise the electrosmog emitted by radio-controlled systems like the utility meters mentioned above. Regulation is only possible using a new, specially developed converter: the E-Link Converter. The converter is placed directly on the electronic meter. Neither the Room-Converter nor the other i-like Converters have these counter-frequencies. Unfortunately, the installation of a new E-Link Converter on the Room-Converter is not sufficient. The new Converter really needs to be attached directly to or placed on the radio transmission system.

  • Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic
    After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50020 60x Vitalpflaster 1x
    CHF174.50
    -
    +
  • Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic
    After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50020 60x Vitalpflaster 1x
    CHF174.50
    -
    +
  • Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic
    After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50020 60x Vitalpflaster 1x
    CHF174.50
    -
    +
Scroll